The MDK-ES-10 is a digital Multifunctional Control Unit which can be controlled by different types:
- control via a potentiometer
- control via a single button
- control via several buttons
- control with switching dimming actuator
It also has a 230V switching output as well as a 0-10V and 1-10V analog output, allowing additional standard dimmers or dimmable electronic ballasts (ECG) to be controlled.
Electrical Data
| Mains voltage | 230 V ±10% |
| Mains frequency | 50 Hz (option 60 Hz) |
| Technology switching output | switched triac (zero voltage switch) |
| Maximum load switching output | 10A |
| Minimum load dimming output | 1 W light bulb |
| Power loss at nominal load | 15 W |
| Power loss standby | 2.5 W |
| Cooling | natural circulating air |
| Open circuit voltage | < 50 Vrms |
| Short circuit protection | circuit breaker 13 A max. (characteristic B or C) |
| Overload protection | reducing in case of overtemperature (status LED flashes) |
| Switch-on delay | approx. 400 ms (mains switch-on) |
| Operating and error indication | 3 LEDs (Power, Run, Status) |
